Construction's Credit Crunch: How Tight Lending and Rising Costs Are Disrupting Projects

Category: Uncategorized
Published: Nov 16, 2026

Most contractors who lose bonding capacity during a credit crunch don't lose it on one bad job. They lose it by chasing revenue their balance sheet can't support. With banks pulling back and costs climbing again, disciplined growth will do more for your bond line this year than anything else.

The lending picture has shifted under contractors' feet. In the Federal Reserve's October 2026 Senior Loan Officer Opinion Survey, banks reported tightening standards on commercial and industrial loans to small firms over the third quarter, along with tighter standards on construction and land development loans. Larger borrowers saw little change. For the small and mid-sized contractors who make up most of the bonded market, that means less room on the bank line just as projects get more expensive to run.

And they are getting more expensive. According to Associated Builders and Contractors, construction input prices rose 11.2% between September 2025 and September 2026, the biggest annual increase in nearly four years.

Put those two together and you get the problem sureties are underwriting right now: contractors carrying more cost on every job with less credit behind them. Below is how that's changing the way sureties look at your account, and what I'd do about it over the next 12 months.

Tighter Bank Credit Hits Bonding Capacity Through Working Capital

Your bank line and your bond line are more connected than they look. Contractors lean on their line of credit to cover payroll, materials, and the gap between paying for a job and getting paid for it. When a bank tightens terms or cuts availability, that pressure lands on working capital.

Working capital is one of the first numbers a surety looks at when setting your capacity for performance and payment bonds or considering an increase. Less of it, or less certainty around it, makes an increase harder to justify and can put your existing program under review.

To see why a smaller bank line matters, look at how capacity is usually set. Many sureties start with a multiple of working capital, often around 10 times, though the figure varies by surety and by contractor. At that multiple, every $100,000 of working capital lost to a tighter line or slower collections can take roughly $1 million off your aggregate capacity. The math runs the other way too. Collecting old receivables or holding back on owner distributions can add capacity without winning a single new job.

Growth is still possible, but it has to be planned around liquidity. Before taking on a larger project, contractors should know what it will demand in cash and where that cash will come from. The items worth tracking closely are:

  • Working capital and how much is still available on the bank line
  • Accounts receivable aging
  • Overbillings and underbillings
  • Cash flow projections for current and planned work
  • Upcoming equipment purchases and how they'll be financed

If you plan to grow in the next year, have the liquidity conversation before you bid, not after you win. Know how each new job will be funded and how it affects your line. Sureties will back growth they can see is funded. Growth that depends on the bank line holding up is much harder to support.

The Financial Warning Signs Sureties Watch Most Closely

Higher borrowing costs, pricier equipment financing, and less room on the bank line all squeeze the same thing: liquidity. That's where underwriters are focused.

When sureties review a contractor's file right now, they're looking hard at:

  • Shrinking liquidity. Falling cash balances or working capital from one statement to the next.
  • Revenue against backlog. Whether the work coming in supports the overhead and the line.
  • Receivables aging. Older A/R points to slow collections or disputed work.
  • Rising underbillings. Costs running ahead of billing often mean a job is in trouble or the estimate was off.
  • Cash burn and bank line usage. Drawing more on the line to fund day-to-day operations.

None of these alone sinks an account. What concerns sureties is seeing several move the wrong way at once. Underbillings climbing while A/R ages, cash falls, and the line gets drawn down is a pattern underwriters have seen end badly.

Watch these numbers the way your surety does. When two or three start trending the wrong way, call your surety broker before your next financial statement goes in, and explain what's happening and what you're doing about it. An underwriter who hears it from you first will treat it very differently from one who finds it in the numbers.

Rising Costs Have Put WIP Schedules Under a Microscope

With material and labor costs moving the way they have, sureties are reading work-in-progress schedules more closely than they did a few years ago. The main shift is that they're tracking trends across several WIPs. A single schedule tells an underwriter where a job stands today. Several in a row show whether margins are holding or slowly eroding.

In practice, sureties are:

  • Tracking profitability on each job from the start and following it through completion
  • Comparing successive WIPs to catch margin fade early
  • Expecting cost-to-complete figures that reflect what labor and materials cost now, not what was in the original estimate
  • Testing whether underbillings and pending change orders are realistically collectible

A job that bid at a healthy margin a year ago may look very different once current costs are run through it. If the WIP doesn't show that, the surety will usually find it anyway.

Update your cost-to-complete estimates every time you prepare a WIP, using current prices. Optimistic numbers in a WIP don't protect your bond line. They wear down the surety's trust in everything else you report.

Alternative Financing Can Help or Mask the Problem

As bank credit tightens, more contractors are using factoring, supply chain financing, or private credit to keep cash moving. These arrangements can preserve liquidity, and for some contractors they're the right call. Sureties will want to understand them in detail.

When alternative financing shows up in a file, underwriters typically ask:

  • How durable is it? What happens to the arrangement if the contractor or the market comes under stress?
  • What does it really cost? Fees and interest on these products can run well above a conventional bank line.
  • What are the terms? Repayment schedules, covenants, and what the lender can do if things go wrong.
  • Does it create new liabilities? Sureties look past the balance sheet presentation to the underlying obligations.
  • Where does it leave the surety? If the lender has a claim on receivables or other assets, those may not be available to support the contractor or the surety if a bonded job runs into trouble.

The line underwriters draw is between use and dependence. Occasional use to cover a timing gap is normal. Relying on it month after month suggests normal operations can't fund the business. For a financially sound contractor, alternative financing can strengthen liquidity and support more work. For a weaker one, it can hide a working capital problem while the added cost and terms make that problem worse.

Before signing any alternative financing agreement, bring it to your surety broker. How it's structured, especially any lien on receivables, can affect your bonding program as much as the cash it provides. Disclose it up front, because sureties are far less forgiving of financing they discover on their own.

Growing Outside Your Lane Is the Biggest Risk Right Now

When margins tighten and credit gets harder to find, some contractors try to grow their way out by chasing larger jobs or work outside their usual scope. Sureties see this often, and they look hard at whether the growth is controlled or whether it's covering for falling profit or a cash shortfall.

Growth has to be supported by the balance sheet, with enough working capital and equity behind it. Beyond the numbers, a surety evaluating an expansion will want direct answers to a few questions:

  • How far is this work from what you've done successfully before, in size, type, or location?
  • Are you chasing revenue or pursuing profitable growth?
  • Can your current management team handle the added responsibility?
  • How will you finance it?
  • What happens if the job doesn't go to plan?

That last question carries the most weight. A surety needs to know you can absorb a loss on a new job without putting your other bonded projects at risk.

For smaller contractors feeling the bank squeeze most, the SBA Surety Bond Guarantee Program is worth asking about. The SBA guarantees bid, performance, and payment bonds for qualifying small businesses on contracts up to $9 million, or up to $14 million on federal contracts when a contracting officer certifies the need. Because the government shares the risk, sureties can support contractors whose working capital wouldn't qualify them in the standard market. It still takes clean books and a realistic plan, but it can give a growing firm room to build a track record while its financials catch up.

If you want to take on a larger job or a new type of work, bring your surety a plan along with the bid request. Show how you'll staff it, fund it, and handle it if it goes sideways. Contractors who arrive with those answers get far more support than those who just ask for a bigger number.

Final Recommendations for the Next 12 Months

If you're working to protect your bond line through this credit crunch, it comes back to two priorities: preserve liquidity and keep growth disciplined. Here's where I'd focus:

1. Meet With Your Bank Before You Need To

Don't wait for renewal. Meet with your lender proactively, keep them informed, and make sure your line of credit will be there for the work you're planning.

2. Keep Your WIP Accurate and Current

Cost-to-complete, job costs, underbillings, and profit should all reflect reality as of the report date.

3. Stay on Top of Receivables

Aging A/R ties up the working capital your surety relies on. Collect aggressively and deal with disputes early.

4. Manage Your Backlog Deliberately

Take on work your balance sheet and your team can support, and be honest about the work they can't.

5. Talk to Your Surety Regularly

Keep in touch between bond requests, too. Regular contact, accurate recordkeeping, and strong internal controls are what build an underwriter's confidence over time.

Your liquidity and the accuracy of your reporting are what keep your bond line in place. Contractors who protect both, and who keep their surety informed when things change, will come through this period with their capacity intact and be ready to grow when credit loosens.

At Lance, we'd rather hear from a contractor six months before a problem than six days after it. If you want to review where your bonding program stands heading into next year, talk to our team. If you're bonding for the first time, start with our guide on how to get a surety bond.

Sources

Associated Builders and Contractors.. Construction materials prices jump 2.2% in September, up 11.2% year over year [Press release].
https://www.abc.org/News-Media/News-Releases/abc-construction-materials-prices-jump-22-in-september-up-112-year-over-year

Board of Governors of the Federal Reserve System. (2026). The October 2026 Senior Loan Officer Opinion Survey on bank lending practices.
https://www.federalreserve.gov/data/sloos/sloos-202610.htm

U.S. Small Business Administration. (n.d.). Surety bonds. Retrieved November 6, 2026, from
https://www.sba.gov/loans/additional-funding-opportunities/surety-bonds/

Get a FREE Surety Bond Quote in Minutes

  • cta-banner--shild
    Fast and Secure Application
  • cta-banner--money-back
    Money Back Guarantee
  • cta-banner--clock
    Approval in Minutes
  • cta-banner--coverage
    Nationwide Coverage
Get a FREE Surety Bond Quote in Minutes
  • Fast and Secure Application
  • Nationwide Coverage
  • Approval in Minutes
  • Money Back Guarantee
Companies we work with:
  • Image
    great-american-insurance-group
  • Image
    Philadelphia insurance companies
  • Image
    markel
About Lance Surety Bonds

Lance Surety Bond Associates, Inc. is a surety bond agency based out of southeastern Pennsylvania that is able to write all surety bond types in all 50 states. We are dedicated to servicing all of our customers' surety bonding needs throughout the country and guarantee competitive rates, timely responses, and unparalleled customer service.

Subscribe to Our Newsletter
Stay updated with the latest by subscribing to our newsletter below.
Thanks for subscribing!

English